Ana içeriğe geç

Giriş

Tablet screens often get damaged, this guide will walk a user through the steps of replacing a damaged screen. It is important to be careful about damaging parts, as most pieces are fragile.

Parçalar

Hiçbir parça belirtilmedi.

  1. Locate the indentation at the bottom of the device. Locate the indentation at the bottom of the device.
    • Locate the indentation at the bottom of the device.

  2. Pull on the indentation and take off the casing of the device. Pull on the indentation and take off the casing of the device. Pull on the indentation and take off the casing of the device.
    • Pull on the indentation and take off the casing of the device.

  3. Remove the faulty battery and insert a replacement in its slot. Remove the faulty battery and insert a replacement in its slot.
    • Remove the faulty battery and insert a replacement in its slot.

  4. Remove the six 2.4 mm, Phillips #0 screws circled in the image.
    • Remove the six 2.4 mm, Phillips #0 screws circled in the image.

  5. Remove inner casing exposing the motherboard.
    • Remove inner casing exposing the motherboard.

  6. Remove speakers by peeling back yelllow tape. Remove speakers by peeling back yelllow tape.
    • Remove speakers by peeling back yelllow tape.

  7. Remove ribbon cable on top of motherboard.
    • Remove ribbon cable on top of motherboard.

  8. Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.
    • Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.

  9. Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.
    • Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.

  10. Verify that all screws are detached from screen.
    • Verify that all screws are detached from screen.

  11. Detach screen from main assembly.
    • Detach screen from main assembly.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Stewart Jenkins

Üyelik tarihi: 26-03-2018

207 İtibar

1 Kılavuz yazıldı

Takım

IUPUI, Team S1-G1, Harley Spring 2018 IUPUI, Team S1-G1, Harley Spring 2018 üyesi

IUPUI-HARLEY-S18S1G1

7 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

How can I do step 5? Do i need to push on the rectangle slots? It’s not very descriptive.

Nick “Blue” Wong - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 95