Giriş

The ABXY buttons are crucial for game and menu control, making them essential for gaming consoles. These buttons are easily accessible once the motherboard is removed. If your ABXY buttons are sticking or unresponsive, it might be time to consider cleaning or replacing them.

This guide will show you how to access the REACT-R and replace the ABXY buttons. The only tool needed for this guide is a Phillips #00 screwdriver.

Neye ihtiyacın var

Adım 1 Rear Case

Turtle Beach REACT-R ABXY Buttons Replacement, Rear Case: adım 1, 3 resimden 1.

Turtle Beach REACT-R ABXY Buttons Replacement, Rear Case: adım 1, 3 resimden 2.

Turtle Beach REACT-R ABXY Buttons Replacement, Rear Case: adım 1, 3 resimden 3.

Place the controller face down.
Use a Phillips #00 screwdriver to remove the seven 9.2 mm Phillips screws that secure the rear case.
Use both hands to lift the backplate away from the controller.

Düzenle

Adım 2 Motherboard

Turtle Beach REACT-R ABXY Buttons Replacement, Motherboard: adım 2, 3 resimden 1.

Turtle Beach REACT-R ABXY Buttons Replacement, Motherboard: adım 2, 3 resimden 2.

Turtle Beach REACT-R ABXY Buttons Replacement, Motherboard: adım 2, 3 resimden 3.

Use a Phillips #00 to remove the four 9.2 mm screws that secure the motherboard.
Two of the screws are hidden under the red and black vibration motor wires.
Gently lift the motherboard up and out of the chassis.
Be careful not to strain the vibration motor wires.

Düzenle

Adım 3 ABXY Buttons

Turtle Beach REACT-R ABXY Buttons Replacement, ABXY Buttons: adım 3, 2 resimden 1.

Turtle Beach REACT-R ABXY Buttons Replacement, ABXY Buttons: adım 3, 2 resimden 2.

With the motherboard removed from the face plate, the buttons will be exposed from the inside.
The buttons are no longer secure and may fall out. To avoid this, make sure the controller is face down.
Gently remove the ABXY buttons.