Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

Giriş

Required is:

  • one spring from a ballpoint pen
  • Superglue

The spring is pushed over the damaged area so that the spring surpasses the damaged area slightly on both sides. Then glue with super glue on the plug side.

  1. Outer insulation is damaged but the cable is working.
    • Outer insulation is damaged but the cable is working.

  2. Spring from an old ballpoint pen, approx. 30mm long.
    • Spring from an old ballpoint pen, approx. 30mm long.

  3. Turn the spring around the cable.
    • Turn the spring around the cable.

  4. Then continue to "wrap".
    • Then continue to "wrap".

  5. The spring must be pulled slightly over the old bend protection.
    • The spring must be pulled slightly over the old bend protection.

  6. Finally fix with super glue and also glue the damaged area.
    • Finally fix with super glue and also glue the damaged area.

Sonuç

Follow the steps in the reverse order to reassemble your device.

Bu çevirmenlere özel teşekkürler:

100%

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

John Raster

Üyelik tarihi: 24-06-2013

128 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 7

Son 30 gün: 28

Her zaman: 517