Eşyalarını Tamir Et Topluluk Mağaza

UTStarcom CDM8945vw Keyboard Replacement

Giriş

Follow this guide to properly replace the keyboard.

Neye ihtiyacın var

  1. UTStarcom CDM8945vw Keyboard Replacement, Battery: adım 1, 1 resimden 1.

    • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

    Düzenle

  2. UTStarcom CDM8945vw Keyboard Replacement: adım 2, 1 resimden 1.

    • Remove the battery.

    Düzenle

  3. UTStarcom CDM8945vw Keyboard Replacement, Antenna: adım 3, 1 resimden 1.

    • Identify the antenna. It is the extendable plastic component pictured here.

    Düzenle

  4. UTStarcom CDM8945vw Keyboard Replacement: adım 4, 1 resimden 1.

    • Twist the base in a counter-clockwise motion to unscrew the antenna.

    Düzenle

  5. UTStarcom CDM8945vw Keyboard Replacement: adım 5, 2 resimden 1. UTStarcom CDM8945vw Keyboard Replacement: adım 5, 2 resimden 2.

    • The antenna should slide right out of the phone when finished.

    Düzenle

  7. UTStarcom CDM8945vw Keyboard Replacement, Speaker: adım 6, 1 resimden 1.

    • Remove the small rubber grommet using the plastic opening tool.

    Düzenle

  8. UTStarcom CDM8945vw Keyboard Replacement: adım 7, 1 resimden 1.

    • Remove five screws using a Phillips #00 screwdriver.

    Düzenle

  9. UTStarcom CDM8945vw Keyboard Replacement: adım 8, 1 resimden 1.

    • Use the plastic opening tool to separate the two pieces that form the outer case of the phone.

    • Prying the two pieces apart may be difficult. Carefully apply a moderate amount of pressure when attempting to separate the two pieces or else you will risk breaking them.

    Düzenle

  10. UTStarcom CDM8945vw Keyboard Replacement: adım 9, 1 resimden 1.

    • Remove the back piece of the outer case.

    Düzenle

  11. UTStarcom CDM8945vw Keyboard Replacement: adım 10, 1 resimden 1.

    • Remove the speaker using a plastic opening tool.

    • Apply a small amount of force when removing the broken speaker from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

    Düzenle

  12. UTStarcom CDM8945vw Keyboard Replacement: adım 11, 2 resimden 1. UTStarcom CDM8945vw Keyboard Replacement: adım 11, 2 resimden 2.

    • Remove the wire attached to the speaker from the motherboard using tweezers.

    • Apply a small amount of force when removing the wire from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

    Düzenle

  13. UTStarcom CDM8945vw Keyboard Replacement, Logic Board: adım 12, 1 resimden 1.

    • Detach the highlighted piece from the logic board using a plastic opening tool.

    Düzenle

  14. UTStarcom CDM8945vw Keyboard Replacement: adım 13, 2 resimden 1. UTStarcom CDM8945vw Keyboard Replacement: adım 13, 2 resimden 2.

    • Remove the logic board from the anterior piece of the outer case using the plastic opening tool.

    Düzenle

  15. UTStarcom CDM8945vw Keyboard Replacement, Keyboard: adım 14, 1 resimden 1.

    • Remove the keyboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Bryon Hazlewood

Üyelik tarihi: 10/03/12

1 İtibar

2 adet Kılavuz yazıldı

Rozetler: 2

Ekip

Cal Poly, Team 24-26, Regan Fall 2012 Cal Poly, Team 24-26, Regan Fall 2012 üyesi

CPSU-REGAN-F12S24G26

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 310