Ana içeriğe geç

UTStarcom XV6700 Camera Replacement

Neye ihtiyacın var

  1. UTStarcom XV6700 Camera Replacement, Battery: adım 1, 1 resimden 1.
    • Press the on/off button on the top to power the phone off.

  2. UTStarcom XV6700 Camera Replacement: adım 2, 1 resimden 1.
    • Remove the battery cover by pressing and sliding the cover down and off of the phone.

  3. UTStarcom XV6700 Camera Replacement: adım 3, 3 resimden 1. UTStarcom XV6700 Camera Replacement: adım 3, 3 resimden 2. UTStarcom XV6700 Camera Replacement: adım 3, 3 resimden 3.
    • Pull the battery removal tab and lift the battery out of the phone.

    • If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

  4. UTStarcom XV6700 Camera Replacement, Camera: adım 4, 1 resimden 1.
    • Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.

  5. UTStarcom XV6700 Camera Replacement: adım 5, 2 resimden 1. UTStarcom XV6700 Camera Replacement: adım 5, 2 resimden 2.
    • Use firm pressure to carefully pry off the cover with your fingers.

  6. UTStarcom XV6700 Camera Replacement: adım 6, 1 resimden 1.
    • Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

  7. UTStarcom XV6700 Camera Replacement: adım 7, 1 resimden 1.
    • Gently pry off the camera flash circuit board with the spudger.

  8. UTStarcom XV6700 Camera Replacement: adım 8, 1 resimden 1.
    • Gently pry off the camera with the spudger.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jesse Walker

Üyelik tarihi: 06/04/13

201 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 175