Ana içeriğe geç

UnBranded UB-15MS10 Back Panel Replacement

Arşivlenmiş Kılavuz
Bu kılavuz sadece arşivsel amaçlarla muhafaza edilmiştir. Onarımınızı gerçekleştirmek için kılavuzun güncel halini kullanın.

Neye ihtiyacın var

  1. UnBranded UB-15MS10 Back Panel Replacement, Back Panel: adım 1, 1 resimden 1.
    • Remove the cover over the Micro SD outlet by using a plastic opening tool to pry open and push out the cover panel.

  2. UnBranded UB-15MS10 Back Panel Replacement: adım 2, 1 resimden 1.
    • Remove the two 4-mm #0 screws from the inside of the Micro SD compartment.

  3. UnBranded UB-15MS10 Back Panel Replacement: adım 3, 2 resimden 1. UnBranded UB-15MS10 Back Panel Replacement: adım 3, 2 resimden 2.
    • Insert blue guitar picks in the crease between the top and bottom panels starting on the same end as the Micro SD slot.

    • Inserting the picks directly under the Micro SD compartment was the easiest place to get started. It still requires some force.

  4. UnBranded UB-15MS10 Back Panel Replacement: adım 4, 1 resimden 1.
    • Insert the black spudger between the guitar picks in order to pry open gaps between the blue guitar picks.

    • As the gaps open, slide the guitar picks along the sides to separate the panels.

  5. UnBranded UB-15MS10 Back Panel Replacement: adım 5, 1 resimden 1.
    • Pry all four sides apart using the blue guitar picks and the black spudger until they can easily be pried apart by hand.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

Andrea Hammans

Üyelik tarihi: 09/16/15

579 İtibar

1 Kılavuz yazıldı

Ekip

IUPUI, Team 2-1, Baechle Fall 2015 IUPUI, Team 2-1, Baechle Fall 2015 üyesi

IUPUI-BAECHLE-F15S2G1

3 Üyeler

3 adet Kılavuz yazıldı

Bir Yorum

Thanks you, work good for me.

Cesar Alvarez - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,294