Eşyalarını Tamir Et Topluluk Mağaza

Uniden D1688 multistation and handset disassembly

Giriş

We will teach you how to successfully take apart the phone system to do any repairs and be able to fully but it back together.

Neye ihtiyacın var

  1. Uniden D1688 multistation and handset disassembly, Uniden D1688 multistation and handset disassembly: adım 1, 1 resimden 1.

    • Unplug the phone from the base by detaching the RJ-11 plug.

    • Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.

    Düzenle

  2. Uniden D1688 multistation and handset disassembly: adım 2, 1 resimden 1.

    • Using the spudger, separate the top shell of the base from the bottom shell from the base.

    • Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!

    Düzenle

  3. Uniden D1688 multistation and handset disassembly: adım 3, 1 resimden 1.

    • Unscrew the 3 screws (Head Size: 4mm Length: 8.6 mm) from the top shell circuit board.

    Düzenle

  4. Uniden D1688 multistation and handset disassembly: adım 4, 1 resimden 1.

    • Unscrew the 2 screws (Head Size: 4mm Length: 8.66) on the small circuit board in the top shell.

    Düzenle

  5. Uniden D1688 multistation and handset disassembly: adım 5, 1 resimden 1.

    • Disconnect the ribbon cable from the bottom shell circuit board.

    Düzenle

  7. Uniden D1688 multistation and handset disassembly: adım 6, 1 resimden 1.

    • Release the speaker from the locking pin by pushing down on each ending side of the pin and pushing it away from the speaker.

    Düzenle

  8. Uniden D1688 multistation and handset disassembly: adım 7, 1 resimden 1.

    • Remove rubber keyboard underlay from top shell.

    Düzenle

  9. Uniden D1688 multistation and handset disassembly: adım 8, 1 resimden 1.

    • Push the plastic keyboard pieces out of the top shell.

    Düzenle

  10. Uniden D1688 multistation and handset disassembly: adım 9, 1 resimden 1.

    • Unscrew bottom shell circuit board screws (Head size: 4mm Length: 8.6mm).

    Düzenle

  11. Uniden D1688 multistation and handset disassembly: adım 10, 1 resimden 1.

    • The disassembly of the phone base is complete!

    • Now this guide will move on to taking apart one of the handsets.

    Düzenle

  12. Uniden D1688 multistation and handset disassembly: adım 11, 1 resimden 1.

    • Slide the battery cover off of the handset, and unplug the battery.

    Düzenle

  13. Uniden D1688 multistation and handset disassembly: adım 12, 1 resimden 1.

    • Remove the battery, and unscrew the two screws (Head Size: 4mm Length: 8.6 mm).

    Düzenle

  14. Uniden D1688 multistation and handset disassembly: adım 13, 1 resimden 1.

    • Use spudger to separate the phone shell.

    Düzenle

  15. Uniden D1688 multistation and handset disassembly: adım 14, 1 resimden 1.

    • Unscrew the two screws (Head Size: 4mm Length: 8.6mm) on the bottom shell keeping the speaker locking pin in place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

7 tane daha katılımcı ile

Nicholas Weeks

Üyelik tarihi: 01/27/15

101 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

Pasco Hernando, Team 1-4, Prince Winter 2015 Pasco Hernando, Team 1-4, Prince Winter 2015 üyesi

PHSC-PRINCE-W15S1G4

6 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 522