Ana içeriğe geç

Unsticking SteelSeries Nimbus Triggers

Neye ihtiyacın var

  1. Unsticking SteelSeries Nimbus Triggers, Unsticking SteelSeries Nimbus Triggers: adım 1, 1 resimden 1.
    • When your triggers get stickier than the Cheeto® dust on your hands it might be time for an intervention.

  2. Unsticking SteelSeries Nimbus Triggers: adım 2, 2 resimden 1. Unsticking SteelSeries Nimbus Triggers: adım 2, 2 resimden 2.
    • Start off by removing the four TR9 Torx Security screws on the back of the controller.

  3. Unsticking SteelSeries Nimbus Triggers: adım 3, 3 resimden 1. Unsticking SteelSeries Nimbus Triggers: adım 3, 3 resimden 2. Unsticking SteelSeries Nimbus Triggers: adım 3, 3 resimden 3.
    • The two screws on the top are further inset than the others. You can use the iFixit 1/4" to 4 mm Driver Adapter as an extender.

  4. Unsticking SteelSeries Nimbus Triggers: adım 4, 2 resimden 1. Unsticking SteelSeries Nimbus Triggers: adım 4, 2 resimden 2.
    • The case is now open, but it's still held together by two clips on the top.

  5. Unsticking SteelSeries Nimbus Triggers: adım 5, 3 resimden 1. Unsticking SteelSeries Nimbus Triggers: adım 5, 3 resimden 2. Unsticking SteelSeries Nimbus Triggers: adım 5, 3 resimden 3.
    • Apply a gentle twisting motion to separate the first clip.

    • Twist in the other direction to separate the second clip.

    • The top is now free!

  6. Unsticking SteelSeries Nimbus Triggers: adım 6, 3 resimden 1. Unsticking SteelSeries Nimbus Triggers: adım 6, 3 resimden 2. Unsticking SteelSeries Nimbus Triggers: adım 6, 3 resimden 3.
    • Be mindful of the three cables still connecting the two halves.

  7. Unsticking SteelSeries Nimbus Triggers: adım 7, 2 resimden 1. Unsticking SteelSeries Nimbus Triggers: adım 7, 2 resimden 2.
    • Here's our problem, the rubber pad has fallen off of the plastic stop leaving only the glue behind.

    • The rubber pad should still be in the controller somewhere (happy hunting) or if you're not in the mood for hide and seek any kind of foam will work as a replacement.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

Jonathan

Üyelik tarihi: 03/13/13

464 İtibar

2 adet Kılavuz yazıldı

4 Yorum

Great, concise fix instructions!

Brian Pippen - Yanıt

My nimbus started to have sticky triggers. I could not believe that I had found this solution! Awesome!

Max-Heinrich Laves - Yanıt

Hi, I have a Nimbus + controller. It's seems to have clips at the back too. Any advice on how to open it?

Sean Hudson - Yanıt

Greetings, someone who can help me where I can get the joystick, original remote control ?

Excellent information

bryan Andino - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 36

Her zaman: 6,077