Ana içeriğe geç

VTech Baby's Learning Laptop Battery and Rear Panel Replacement

Neye ihtiyacın var

  1. VTech Baby's Learning Laptop Battery and Rear Panel Replacement, Battery and Rear Panel: adım 1, 1 resimden 1.
    • To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.

    • A coin can also be used to loosen the screw.

  2. VTech Baby's Learning Laptop Battery and Rear Panel Replacement: adım 2, 1 resimden 1.
    • Remove the battery door.

    • Take out the batteries.

  3. VTech Baby's Learning Laptop Battery and Rear Panel Replacement: adım 3, 1 resimden 1.
    • Remove the rear panel screws using a Phillips #2 screwdriver.

    • Two 21.6mm (Long)

    • One 9.8mm (Short)

    • Five 13.8mm (Medium)

  4. VTech Baby's Learning Laptop Battery and Rear Panel Replacement: adım 4, 2 resimden 1. VTech Baby's Learning Laptop Battery and Rear Panel Replacement: adım 4, 2 resimden 2.
    • Gently pull up on the rear panel.

    • Be careful not to pull on the wire connections.

    • Rest the laptop open on the table.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Christopher Kourmoulakis

Üyelik tarihi: 09/03/15

373 İtibar

3 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 12-2, Blackwell Fall 2015 USF Tampa, Team 12-2, Blackwell Fall 2015 üyesi

USFT-BLACKWELL-F15S12G2

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 3

Son 30 gün: 3

Her zaman: 1,098