Eşyalarını Tamir Et Topluluk Mağaza

VTech Record and Learn KidiStudio Whammy Bar Replacement

Giriş

This guide provides knowledge on how to replace the Whammy bar on the 2014 Vtech Record and Learn KidiStudio.

Neye ihtiyacın var

  1. VTech Record and Learn KidiStudio Whammy Bar Replacement, Whammy Bar: adım 1, 2 resimden 1. VTech Record and Learn KidiStudio Whammy Bar Replacement, Whammy Bar: adım 1, 2 resimden 2.

    • Unscrew 11 PH2 screws (7 mm).

    • Remove black plastic backing.

    • Remove the batteries from the toy before beginning replacement of the whammy bar.

    Düzenle

  3. VTech Record and Learn KidiStudio Whammy Bar Replacement: adım 2, 2 resimden 1. VTech Record and Learn KidiStudio Whammy Bar Replacement: adım 2, 2 resimden 2.

    • Remove PH2 screw (5 mm) from yellow/gold colored circuit board and pull back to access the whammy component.

    Düzenle

  4. VTech Record and Learn KidiStudio Whammy Bar Replacement: adım 3, 2 resimden 1. VTech Record and Learn KidiStudio Whammy Bar Replacement: adım 3, 2 resimden 2.

    • Remove 3 PH2 (5 mm) screws connected to the whammy bar component.

    • Remove blue piece from back of the device. This will free the whammy bar. Replace the whammy bar with new part.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Shaina Carbonel

Üyelik tarihi: 02/01/16

537 İtibar

5 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

UW Tacoma, Team 1-1, Rose Winter 2016 UW Tacoma, Team 1-1, Rose Winter 2016 üyesi

UWT-ROSE-W16S1G1

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 7

Her zaman: 209