VTech Safe And Sound DM221 Buttons Replacement - iFixit Tamir Kılavuzu

Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

Are the letters on your buttons fading? Use this guide to replace the buttons on your baby monitor.

Neye ihtiyacın var

1. Adım 1 Buttons
  Remove the battery cover by sliding it down.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
2. Adım 2
  Firmly grasp the battery and pull to disconnect the battery from its connector.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
4. Adım 3
  Using a Phillips #00 screwdriver, unscrew the two 5.0 mm screws located at the bottom of the monitor inside of the device.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
5. Adım 4
  Using a plastic opening tool, pry apart the front part of the device from the back. There are many access points, but the best spot to insert the spudger is around the "TALK" button.
  
  Avoid using the metal spudger. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024
6. Adım 5
  Remove the buttons from the front part of the device.
  
  Tip: The buttons on the front of the device (“POWER,” “SELECT,” “MENU,” “VOLUME”) are all connected as one unit. Pull them out carefully.
  Düzenle
  
  FixBot'a Sor
  
  Yorum Ekle
  
  1024

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

Yazar

3 tane daha katılımcı ile

Krystal

Üyelik tarihi: 10/01/15

600 İtibar

5 adet Kılavuz yazıldı

+10 tane daha rozet

Ekip

USF Tampa, Team 1-5, Leahy Fall 2015 USF Tampa, Team 1-5, Leahy Fall 2015 üyesi

USFT-LEAHY-F15S1G5

4 Üyeler

30 adet Kılavuz yazıldı

0Kılavuz Yorumları

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 7

Son 30 gün: 15

Her zaman: 635