Ana içeriğe geç

VTech Safe And Sound DM221 Speaker Replacement

Neye ihtiyacın var

  1. VTech Safe And Sound DM221 Speaker Replacement, Speaker: adım 1, 1 resimden 1.
    • Remove the battery cover.

  2. VTech Safe And Sound DM221 Speaker Replacement: adım 2, 1 resimden 1.
    • Unplug the battery from its connector and remove.

  3. VTech Safe And Sound DM221 Speaker Replacement: adım 3, 1 resimden 1.
    • Using the Phillips #00 screwdriver, unscrew the two 5.0 mm Phillips #00 screws at the bottom of the monitor.

  4. VTech Safe And Sound DM221 Speaker Replacement: adım 4, 1 resimden 1.
    • Separate the back half of the device from the front using the metal spudger.

  5. VTech Safe And Sound DM221 Speaker Replacement: adım 5, 1 resimden 1.
    • Remove the two 5.0 mm Phillips #00 screws at the top of the device which holds the antenna at the top of the motherboard.

    • This will allow the removal of the silver handle.

  6. VTech Safe And Sound DM221 Speaker Replacement: adım 6, 1 resimden 1.
    • Remove the “TALK” button to get access to remove the motherboard.

  7. VTech Safe And Sound DM221 Speaker Replacement: adım 7, 1 resimden 1.
    • Push down on the antenna, located on the top of the motherboard.

  8. VTech Safe And Sound DM221 Speaker Replacement: adım 8, 1 resimden 1.
    • Gently remove the motherboard away from the monitor.

    • Be careful not to disconnect the red wire.

  9. VTech Safe And Sound DM221 Speaker Replacement: adım 9, 1 resimden 1.
    • Use the plastic spudger to push the two white plastic tabs, at the bottom of the device, up to release the metal retaining clip.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Krystal

Üyelik tarihi: 10/01/15

600 İtibar

5 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 1-5, Leahy Fall 2015 USF Tampa, Team 1-5, Leahy Fall 2015 üyesi

USFT-LEAHY-F15S1G5

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 334