Ana içeriğe geç
  1. Flip laptop over so that "Service TAG" is at the top left.
    • Flip laptop over so that "Service TAG" is at the top left.

  2. Remove screw at bottom right hand corner.
    • Remove screw at bottom right hand corner.

  3. Remove plate by pushing lightly and sliding to the right.
    • Remove plate by pushing lightly and sliding to the right.

  4. Unscrew 4 screws around hard drive. Unscrew 4 screws around hard drive.
    • Unscrew 4 screws around hard drive.

  5. Remove hard drive by pulling upwards on right side of drive
    • Remove hard drive by pulling upwards on right side of drive

    • When inserting new hard drive note that there is a slot on the left where the hard drive port slides into.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Chris Griffin

Üyelik tarihi: 12-03-2014

110 İtibar

1 Kılavuz yazıldı

Takım

UMass Dartmouth, Team 2-6, Vijaybhaskar Spring 2014 UMass Dartmouth, Team 2-6, Vijaybhaskar Spring 2014 üyesi

UMASSD-VIJAYBHASKAR-S14S2G6

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 136