Eşyalarını Tamir Et Topluluk Mağaza

Verizon Ellipsis 10 Back Cover Replacement

Giriş

This guide is designed to provide you with simple steps to remove the back cover of the Verizon Ellipsis 10 to access the internal hardware.

Neye ihtiyacın var

  1. Verizon Ellipsis 10 Back Cover Replacement, Back Cover: adım 1, 1 resimden 1.

    • Open the SD/SIM card cover to start prying off the back cover.

    Düzenle

  2. Verizon Ellipsis 10 Back Cover Replacement: adım 2, 1 resimden 1.

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    Düzenle

  4. Verizon Ellipsis 10 Back Cover Replacement: adım 3, 1 resimden 1.

    • Follow along the edge of the device to undo all of the retaining clips.

    Düzenle

  5. Verizon Ellipsis 10 Back Cover Replacement: adım 4, 1 resimden 1.

    • Once all the clips are undone, the back panel should come off with little effort.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 9

Her zaman: 355