Eşyalarını Tamir Et Topluluk Mağaza

Verizon Ellipsis 10 WiFi Module Replacement

Giriş

The Verizon Ellipsis 10 is a 10.1 inch Android tablet that can be used for many different things such as playing games or for work. This is guide is designed to show how to replace the WiFi module within the tablet. This repair would be done if the tablet is having trouble connecting to WiFi after checking the network settings, restarting device and router, verifying the WiFi password, and making sure it is not in airplane mode. There are no special skills required. Be careful of the sim card and make sure to properly dispose of old WiFi module. Be sure to backup your device before following these instructions so you don't lose any data while completing the replacement. Make sure to power off this device and disconnect from any power source before beginning the process.

Neye ihtiyacın var

  1. Verizon Ellipsis 10 WiFi Module Replacement, Back Cover: adım 1, 1 resimden 1.

    • Open the SD/SIM card cover to start prying off the back cover.

    Düzenle

  2. Verizon Ellipsis 10 WiFi Module Replacement: adım 2, 1 resimden 1.

    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

    Düzenle

  3. Verizon Ellipsis 10 WiFi Module Replacement: adım 3, 1 resimden 1.

    • Follow along the edge of the device to undo all of the retaining clips.

    Düzenle

  5. Verizon Ellipsis 10 WiFi Module Replacement: adım 4, 1 resimden 1.

    • Once all the clips are undone, the back panel should come off with little effort.

    Düzenle

  6. Verizon Ellipsis 10 WiFi Module Replacement, WiFi Module: adım 5, 1 resimden 1.

    • Locate Wi-Fi module in bottom right-hand corner.

    Düzenle

  7. Verizon Ellipsis 10 WiFi Module Replacement: adım 6, 1 resimden 1.

    • Unscrew the M1.5 screw using a Phillips #00 screwdriver.

    Düzenle

  8. Verizon Ellipsis 10 WiFi Module Replacement: adım 7, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using a pair of tweezers or needle nose pliers, pull up the connecting wire.

    • Lift the module out.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 263