Ana içeriğe geç

Giriş

This guide shows how to replace a screen for a Verizon Wireless CDM 7075. This repair will be needed when the screen is damaged.

  1. Remove the back panel by first pressing and holding the gray button on the back. While doing that also press and slide the panel down and off. Remove the back panel by first pressing and holding the gray button on the back. While doing that also press and slide the panel down and off.
    • Remove the back panel by first pressing and holding the gray button on the back. While doing that also press and slide the panel down and off.

  2. Carefully remove the battery from the phone by prying the battery from the top.
    • Carefully remove the battery from the phone by prying the battery from the top.

  3. Remove the rubber plugs from the screw holes around the screen with the opening tool.
    • Remove the rubber plugs from the screw holes around the screen with the opening tool.

  4. Remove the four screws from around the phone's screen with a Phillips screwdriver.
    • Remove the four screws from around the phone's screen with a Phillips screwdriver.

  5. Pry the top cover off the phone with a plastic opening tool.
    • Pry the top cover off the phone with a plastic opening tool.

  6. Remove the screen assembly from the phone.
    • Remove the screen assembly from the phone.

  7. Pry the circuit board off of the screen with the opening tool.
    • Pry the circuit board off of the screen with the opening tool.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Corey Ryman

Üyelik tarihi: 14-10-2011

255 İtibar

4 adet Kılavuz yazıldı

Takım

James Madison, Team 2-4, Allen Fall 2011 James Madison, Team 2-4, Allen Fall 2011 üyesi

JMU-ALLEN-F11S2G4

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 983