Eşyalarını Tamir Et Topluluk Mağaza

Wahl Professional Designer Motor Replacement

Giriş

Use this guide to replace the motor of your Wahl Professional Designer.

Neye ihtiyacın var

  1. Wahl Professional Designer Motor Replacement, Motor: adım 1, 2 resimden 1. Wahl Professional Designer Motor Replacement, Motor: adım 1, 2 resimden 2.

    • Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

    Düzenle

  2. Wahl Professional Designer Motor Replacement: adım 2, 3 resimden 1. Wahl Professional Designer Motor Replacement: adım 2, 3 resimden 2. Wahl Professional Designer Motor Replacement: adım 2, 3 resimden 3.

    • Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released.

    Düzenle

  4. Wahl Professional Designer Motor Replacement: adım 3, 3 resimden 1. Wahl Professional Designer Motor Replacement: adım 3, 3 resimden 2. Wahl Professional Designer Motor Replacement: adım 3, 3 resimden 3.

    • Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip's #1 screwdriver.

    Düzenle

  5. Wahl Professional Designer Motor Replacement: adım 4, 2 resimden 1. Wahl Professional Designer Motor Replacement: adım 4, 2 resimden 2.

    • Gently remove the motor from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Sophia Swearengin

Üyelik tarihi: 09/26/17

718 İtibar

5 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

USF Tampa, Team S14-G5, Boczar Fall 2017 USF Tampa, Team S14-G5, Boczar Fall 2017 üyesi

USFT-BOCZAR-F17S14G5

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 10

Son 30 gün: 17

Her zaman: 1,184