Eşyalarını Tamir Et Topluluk Mağaza

Wand Company Star Trek Communicator Silver Plate Replacement

Giriş

This detailed guide will cover the particulars on how to replace the middle Silver Plate in the event that it becomes damaged or bent.

Neye ihtiyacın var

  1. Wand Company Star Trek Communicator Silver Plate Replacement, Silver Plate: adım 1, 1 resimden 1.

    • Power off the Star trek Bluetooth Communicator before disassembling.

    Düzenle

  2. Wand Company Star Trek Communicator Silver Plate Replacement: adım 2, 2 resimden 1. Wand Company Star Trek Communicator Silver Plate Replacement: adım 2, 2 resimden 2.

    • Remove the four T6 Torx screws (1.70mm) located on the back of the device.

    • Remove the black plastic cover by gently pulling it.

    Düzenle

  3. Wand Company Star Trek Communicator Silver Plate Replacement: adım 3, 2 resimden 1. Wand Company Star Trek Communicator Silver Plate Replacement: adım 3, 2 resimden 2.

    • Remove the protective foam located around the speaker and charging magnets.

    • Be careful not to lose the two magnets located between the microphone and the speaker. The magnets can be easily removed if they come in contact with other magnetic materials.

    Düzenle

  5. Wand Company Star Trek Communicator Silver Plate Replacement: adım 4, 1 resimden 1.

    • Remove the two Phillips PH0 (0.9mm) screws located to the side of each magnet.

    Düzenle

  6. Wand Company Star Trek Communicator Silver Plate Replacement: adım 5, 1 resimden 1.

    • Remove the black cover.

    Düzenle

  7. Wand Company Star Trek Communicator Silver Plate Replacement: adım 6, 1 resimden 1.

    • Remove the protective foam attached to the battery.

    Düzenle

  8. Wand Company Star Trek Communicator Silver Plate Replacement: adım 7, 2 resimden 1. Wand Company Star Trek Communicator Silver Plate Replacement: adım 7, 2 resimden 2.

    • Remove the five Phillips PH0 (0.9mm) screws located at the top and bottom of the silver plate.

    Düzenle

  9. Wand Company Star Trek Communicator Silver Plate Replacement: adım 8, 1 resimden 1.

    • Remove the silver plate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Garret Moses

Üyelik tarihi: 02/15/17

313 İtibar

2 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

Ekip

USF Tampa, Team 5-6, Passmore Spring 2017 USF Tampa, Team 5-6, Passmore Spring 2017 üyesi

USFT-PASSMORE-S17S5G6

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 9

Her zaman: 556