Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Hello all, today we will repair a water damaged phone.

it's a simple cell phone and quite easy to repair.

enjoy

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove back cover & battery. Remove back cover & battery. Remove back cover & battery.
    • Remove back cover & battery.

  2. Remove the front case by prying it open. You will hear clicks. Be careful with taking off screen if you use a spudger.
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al
  4. Use a Torx screwdriver to remove the screen screws. Use a spudger or tweezers to remove the connector of the LCD screen.
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

  5. Remove keyboard by prying it open with a spudger. The keyboard is secured with adhesive, be careful! The keyboard is secured with adhesive, be careful!
    • Remove keyboard by prying it open with a spudger.

    • The keyboard is secured with adhesive, be careful!

  6. The PCB board had water damage, see this in picture 3. To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear. To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  7. How and where to use the cotton swabs. How and where to use the cotton swabs.
    • How and where to use the cotton swabs.

Sonuç

To reassemble your device, follow these instructions in reverse order.

14 farklı kişi bu kılavuzu tamamladı.

Kevin D

Üyelik tarihi: 02-05-2014

6.400 İtibar

21 adet Kılavuz yazıldı

3 Yorum

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - Yanıt

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - Yanıt

Nokia 206 display and charger pin

Mithilesh Yadav - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 7

Son 30 gün: 28

Her zaman: 9,957