Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Water Damage on main board of Nokia 206 RM873

Neye ihtiyacın var

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: adım 1, 3 resimden 1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: adım 1, 3 resimden 2. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: adım 1, 3 resimden 3.
    • Remove back cover & battery.

    FixBot'a Sor

    Yorum Ekle

  2. Water Damage on main board of Nokia 206 RM873: adım 2, 2 resimden 1. Water Damage on main board of Nokia 206 RM873: adım 2, 2 resimden 2.
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

    FixBot'a Sor

    Yorum Ekle

  3. Water Damage on main board of Nokia 206 RM873: adım 3, 2 resimden 1. Water Damage on main board of Nokia 206 RM873: adım 3, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

    FixBot'a Sor

    Yorum Ekle

  4. Water Damage on main board of Nokia 206 RM873: adım 4, 3 resimden 1. Water Damage on main board of Nokia 206 RM873: adım 4, 3 resimden 2. Water Damage on main board of Nokia 206 RM873: adım 4, 3 resimden 3.
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

    FixBot'a Sor

    Yorum Ekle

  5. Water Damage on main board of Nokia 206 RM873: adım 5, 2 resimden 1. Water Damage on main board of Nokia 206 RM873: adım 5, 2 resimden 2.
    • How and where to use the cotton swabs.

    FixBot'a Sor

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

18 farklı kişi bu kılavuzu tamamladı.

Kevin D

Üyelik tarihi: 05/02/14

7.550 İtibar

21 adet Kılavuz yazıldı

4Kılavuz Yorumları

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - Yanıt Paylaş

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - Yanıt Paylaş

Nokia 206 display and charger pin

Mithilesh Yadav - Yanıt Paylaş

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - Yanıt Paylaş

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 11

Son 30 gün: 55

Her zaman: 11,702