Ana içeriğe geç

Wen 2307 Motor Replacement

Neye ihtiyacın var

  1. Wen 2307 Motor Replacement, Front Panel: adım 1, 1 resimden 1.
    • Unscrew the locking sleeve.

  2. Wen 2307 Motor Replacement: adım 2, 1 resimden 1.
    • Remove the hanging clip.

  3. Wen 2307 Motor Replacement: adım 3, 2 resimden 1. Wen 2307 Motor Replacement: adım 3, 2 resimden 2.
    • Unscrew the six 8mm PH2 screws.

  4. Wen 2307 Motor Replacement: adım 4, 1 resimden 1.
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. Wen 2307 Motor Replacement: adım 5, 1 resimden 1.
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Wen 2307 Motor Replacement, Speed Adjustment Assembly: adım 6, 1 resimden 1.
    • Remove the connected wiring from the circuit board.

  7. Wen 2307 Motor Replacement: adım 7, 1 resimden 1.
    • Remove the single 4mm screw retaining the circuit board.

  8. Wen 2307 Motor Replacement: adım 8, 1 resimden 1.
    • Gently pry the circuit board from the back piece.

  9. Wen 2307 Motor Replacement, Motor: adım 9, 1 resimden 1.
    • Gently pull motor assembly out of the panel.

  10. Wen 2307 Motor Replacement: adım 10, 1 resimden 1.
    • Motor separates into two pieces.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joshua Bowery

Üyelik tarihi: 02/08/16

549 İtibar

3 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 12-1, Eyestone Spring 2016 USF Tampa, Team 12-1, Eyestone Spring 2016 üyesi

USFT-EYESTONE-S16S12G1

4 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

All very well and good, but it’s impossible to buy the motor parts to replace…

Closetslave 1 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 13

Her zaman: 611