Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

In this guide, you will learn how to remove the outer casing of the Westcott iPoint Evolution pencil sharpener. Use this guide to replace the casing or to access the sharpener's internal components.

Parçalar

Hiçbir parça belirtilmedi.

  1. Step 1: Have the back of the pencil sharpener facing you so that you can locate the power source.
    • Step 1: Have the back of the pencil sharpener facing you so that you can locate the power source.

  2. Step 2: Grab the end of the plug and pull it out gently
    • Step 2: Grab the end of the plug and pull it out gently

  3. Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it
    • Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it

  4. Step 4: Grab the center of the sharpener and lift up to remove it Step 4: Grab the center of the sharpener and lift up to remove it Step 4: Grab the center of the sharpener and lift up to remove it
    • Step 4: Grab the center of the sharpener and lift up to remove it

  5. Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)' Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)' Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)'
    • Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)'

  6. Step 6: Flip the pencil sharpener upside down. Once upside down you will see four screws located at the bottom of the pencil sharpener.
    • Step 6: Flip the pencil sharpener upside down. Once upside down you will see four screws located at the bottom of the pencil sharpener.

  7. Step 7: Take a screwdriver and begin to unscrew all of the screws on the bottom.
    • Step 7: Take a screwdriver and begin to unscrew all of the screws on the bottom.

  8. Step 8: After all the screws are removed you will be able to cleanly take off the bottom of the sharpener.
    • Step 8: After all the screws are removed you will be able to cleanly take off the bottom of the sharpener.

  9. Step 9: Carefully lift the lid off the sharpener.
    • Step 9: Carefully lift the lid off the sharpener.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 54

Son 30 gün: 258

Her zaman: 6,513