Eşyalarını Tamir Et Topluluk Mağaza

Wolf Gourmet WGBL100S Power Cord Replacement

Giriş

If your power cord is broken and your blender will not turn on, follow these steps to replace it.

Neye ihtiyacın var

  1. Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: adım 1, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: adım 1, 2 resimden 2.

    • With the bottom of the blender facing up, use a Phillips #2 screwdriver to remove the 4, 1/2 inch long screws in the corners of the device.

    • Ensure the blender is off and unplugged before starting.

    Düzenle

  2. Wolf Gourmet WGBL100S Power Cord Replacement: adım 2, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 2, 2 resimden 2.

    • Using a metal spudger, pry up one side of each of the rubber feet.

    • Note that one side of each foot is glued down; pry up the non-glued side.

    Düzenle

  3. Wolf Gourmet WGBL100S Power Cord Replacement: adım 3, 1 resimden 1.

    • Using the same Phillips #2 screwdriver, unscrew the 1/2 inch long screw under each of the feet.

    Düzenle

  4. Wolf Gourmet WGBL100S Power Cord Replacement: adım 4, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 4, 2 resimden 2.

    • Pull off the base and remove the plastic housing underneath.

    Düzenle

  6. Wolf Gourmet WGBL100S Power Cord Replacement: adım 5, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 5, 2 resimden 2.

    • On the underside of the base, unscrew the three 3/8" long screws on the plastic piece holding the power cord in place using a Phillips #1 screwdriver.

    • Pull the plastic cover off.

    Düzenle

  7. Wolf Gourmet WGBL100S Power Cord Replacement: adım 6, 1 resimden 1.

    • Using a wire cutter, cut the three wires of the power cord.

    Düzenle

  8. Wolf Gourmet WGBL100S Power Cord Replacement: adım 7, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 7, 2 resimden 2.

    • Pull the cut power cord through the base.

    • Then thread the replacement cord back through and re-attach the plastic cover.

    Düzenle

  9. Wolf Gourmet WGBL100S Power Cord Replacement: adım 8, 3 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 8, 3 resimden 2. Wolf Gourmet WGBL100S Power Cord Replacement: adım 8, 3 resimden 3.

    • Strip about an inch of insulation off of the snipped power cord and your replacement cord.

    • Twist each strand of wires together to keep them neat.

    Düzenle

  10. Wolf Gourmet WGBL100S Power Cord Replacement: adım 9, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 9, 2 resimden 2.

    • Twist together the wires from the replacement cord to the wires still attached to the blender.

    • Solder the connection if possible.

    Düzenle

  11. Wolf Gourmet WGBL100S Power Cord Replacement: adım 10, 2 resimden 1. Wolf Gourmet WGBL100S Power Cord Replacement: adım 10, 2 resimden 2.

    • Wrap all the connections in electrical tape or heat shrink tubing.

    Düzenle
Sonuç

To reassemble your device, follow steps 1-5 in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Cole Gillespie

Üyelik tarihi: 04/19/18

476 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team S25-G16, Maness Spring 2018 Cal Poly, Team S25-G16, Maness Spring 2018 üyesi

CPSU-MANESS-S18S25G16

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 13

Her zaman: 241