Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

The WowWee MiP robot has a tendency towards short battery life. If the MiP seems too slow or stops responding, use this guide to change the MiP’s batteries. The MiP’s batteries are located in a battery pack on the robot's back.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the three 12.0 mm Phillips # 2 screws from the battery cover. Remove the three 12.0 mm Phillips # 2 screws from the battery cover.
    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

  2. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  3. Carefully pull the battery pack from the robot. Remove the batteries from the battery pack.
    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Moira Keahon

Üyelik tarihi: 24-09-2014

250 İtibar

3 adet Kılavuz yazıldı

Takım

University of Maine, Team 1-50, Diaz Fall 2014 University of Maine, Team 1-50, Diaz Fall 2014 üyesi

UMAINE-DIAZ-F14S1G50

3 Üyeler

3 adet Kılavuz yazıldı

11 Yorum

Its a programmer MIP not this kind.

Azariah Trumble - Yanıt

Same question here, instructions needed for CODER MIP as it doesn't seem to be a holding a charge.

Gil Acosta - Yanıt

does spare battery adapter vailable(not reachargeable)

coolboyz' channel - Yanıt

Coder Mip Battery says fully charged - but Coder Mip doesnt turn on?

Sadie - Yanıt

Coder MiP one day old - was working - battery says fully charged - but Coder MiP doesn’t turn on? Any suggestions?

Sadie - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 14

Son 30 gün: 55

Her zaman: 9,961