Eşyalarını Tamir Et Topluluk Mağaza

WowWee MiP Robot Power Switch Replacement

Giriş

The power switch turns the MiP on or off. If it's malfunctioning the robot will not work.

Neye ihtiyacın var

  1. WowWee MiP Robot Power Switch Replacement, Battery: adım 1, 2 resimden 1. WowWee MiP Robot Power Switch Replacement, Battery: adım 1, 2 resimden 2.

    • Remove the three 12.0 mm Phillips # 2 screws from the battery cover.

    Düzenle

  2. WowWee MiP Robot Power Switch Replacement: adım 2, 2 resimden 1. WowWee MiP Robot Power Switch Replacement: adım 2, 2 resimden 2.

    • Carefully pull the battery pack from the robot.

    • Remove the batteries from the battery pack.

    Düzenle

  3. WowWee MiP Robot Power Switch Replacement, Wheel: adım 3, 2 resimden 1. WowWee MiP Robot Power Switch Replacement, Wheel: adım 3, 2 resimden 2.

    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

    Düzenle

  4. WowWee MiP Robot Power Switch Replacement: adım 4, 2 resimden 1. WowWee MiP Robot Power Switch Replacement: adım 4, 2 resimden 2.

    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

    Düzenle

  6. WowWee MiP Robot Power Switch Replacement: adım 5, 1 resimden 1.

    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

    Düzenle

  7. WowWee MiP Robot Power Switch Replacement, WowWee MiP Robot Body Disassembly: adım 6, 2 resimden 1. WowWee MiP Robot Power Switch Replacement, WowWee MiP Robot Body Disassembly: adım 6, 2 resimden 2.

    • Remove the eight 9.3 mm Phillips #1 screws from the back of the robot.

    Düzenle

  8. WowWee MiP Robot Power Switch Replacement: adım 7, 3 resimden 1. WowWee MiP Robot Power Switch Replacement: adım 7, 3 resimden 2. WowWee MiP Robot Power Switch Replacement: adım 7, 3 resimden 3.

    • Remove the arms from the body.

    • Carefully open the body compartment.

    • Open the compartment slowly. There are wires connecting the two body pieces together. If pulled too hard, the wires and/or the motherboard could be damaged.

    Düzenle

  9. WowWee MiP Robot Power Switch Replacement: adım 8, 1 resimden 1.

    • Using precision tweezers, disconnect the following three bundles of wires:

    • Connecting the battery pack to the motherboard.

    • Connecting the power switch to the motherboard.

    • Connecting the speaker to the motherboard.

    Düzenle

  10. WowWee MiP Robot Power Switch Replacement, Power Switch: adım 9, 2 resimden 1. WowWee MiP Robot Power Switch Replacement, Power Switch: adım 9, 2 resimden 2.

    • Remove the two 9.3mm Phillips #1 screws.

    Düzenle

  11. WowWee MiP Robot Power Switch Replacement: adım 10, 1 resimden 1.

    • Remove the power switch assembly from the body by gently pulling straight out on the wires.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Daniel Burkholder

Üyelik tarihi: 02/16/16

623 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

USF Tampa, Team 3-4, Wollert Spring 2016 USF Tampa, Team 3-4, Wollert Spring 2016 üyesi

USFT-WOLLERT-S16S3G4

4 Üyeler

10 adet Kılavuz yazıldı

Bir Yorum

where can i buy the power switch of MiP

Reinejoe Cacho - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 604