Ana içeriğe geç

Giriş

Use this guide to replace the wheels of your WowWee MiP robot.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap. This plastic material is not replaceable. Any damage will be noticeable.
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  2. Remove the 12.0 mm Phillips #2 screw. Hold the wheel in place, or it will rotate as you attempt to remove the screw.
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  3. Pull the wheel off of the square axle.
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Daniel Burkholder

Üyelik tarihi: 16-02-2016

557 İtibar

4 adet Kılavuz yazıldı

Takım

USF Tampa, Team 3-4, Wollert Spring 2016 USF Tampa, Team 3-4, Wollert Spring 2016 üyesi

USFT-WOLLERT-S16S3G4

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 431