Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Before proceeding, make sure you have all the necessary parts and tools for this replacement guide. This is over the replacement of the speaker for XTreme Tablet Generation 2. Use safety glasses and gloves when applicable.

Parçalar

Hiçbir parça belirtilmedi.

  1. Using a spudger and pry tool, remove the back cover. Start at the top corner, and carefully pry the back cover off of the main body.
    • Using a spudger and pry tool, remove the back cover. Start at the top corner, and carefully pry the back cover off of the main body.

    • Continue around the device, being careful to not dislodge the power button.

  2. Manta Tornavida Seti

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Tornavida Seti

    Upgrade Your Toolbox
  3. Using a solder vacuum and soldering iron, release the red wire from the motherboard first, then release the black wire. The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.
    • Using a solder vacuum and soldering iron, release the red wire from the motherboard first, then release the black wire.

    • The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Kristen John

Üyelik tarihi: 26-01-2015

125 İtibar

1 Kılavuz yazıldı

Takım

Pasco Hernando, Team 5-4, Prince Winter 2015 Pasco Hernando, Team 5-4, Prince Winter 2015 üyesi

PHSC-PRINCE-W15S5G4

6 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 271