Eşyalarını Tamir Et Topluluk Mağaza

Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement

Giriş

Use this guide to replace the left handle cover on your Xbox Series X|S Controller (model 1914).

Neye ihtiyacın var

  1. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Insert an opening tool: adım 1, 3 resimden 1. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Insert an opening tool: adım 1, 3 resimden 2. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Insert an opening tool: adım 1, 3 resimden 3.

    • Insert an opening tool between the left handle cover and the bottom inner edge of the back housing.

    Düzenle

  3. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Release the left handle cover clips: adım 2, 3 resimden 1. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Release the left handle cover clips: adım 2, 3 resimden 2. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Release the left handle cover clips: adım 2, 3 resimden 3.

    • Strong plastic clips secure the handle cover. Significant force is required to release them.

    • Slide the opening tool along the inner edge of the left handle cover and pry intermittently to release the plastic clips.

    Düzenle

  4. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Remove the left handle cover: adım 3, 3 resimden 1. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Remove the left handle cover: adım 3, 3 resimden 2. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Remove the left handle cover: adım 3, 3 resimden 3.

    • The plastic clips on the outer edge make it difficult to slide along it and release the clips. Therefore, prying up on the inner edge is the easier option.

    • Pry up the middle inner edge of the handle cover with the opening tool to release the remaining clips.

    • Place a finger on top of the handle cover to prevent it from being forcefully ejected.

    • Remove the left handle cover.

    • To reinstall the left handle cover, position it on the back housing and press down firmly along the edges to engage all of the clips.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Manuel Haeussermann

Üyelik tarihi: 07/13/22

15.592 İtibar

71 adet Kılavuz yazıldı

Rozetler: 32

+29 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.420 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 20

Son 30 gün: 102

Her zaman: 1,205