Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Xelio P1001A-BK Speakers Replacement

Neye ihtiyacın var

  1. Xelio P1001A-BK Speakers Replacement, Back Cover: adım 1, 2 resimden 1. Xelio P1001A-BK Speakers Replacement, Back Cover: adım 1, 2 resimden 2.
    • Remove the two 3 mm retaining screws from the side of the tablet with a Phillips #0 screwdriver.

  2. Xelio P1001A-BK Speakers Replacement: adım 2, 2 resimden 1. Xelio P1001A-BK Speakers Replacement: adım 2, 2 resimden 2.
    • Insert the plastic opening tool in between the shelf halves and lift the top shelf half to detach the securing tabs.

    • There are four securing tabs located on each long side.

    • Before fully separating the shell halves, observe if the speakers are separated from the shell half. If they are still in their sockets, gently pry them loose with the plastic opening tool.

  3. Xelio P1001A-BK Speakers Replacement, Speakers: adım 3, 1 resimden 1.
    • Locate Soldering points

  4. Xelio P1001A-BK Speakers Replacement: adım 4, 1 resimden 1.
    • With the soldering iron, de-solder the two speaker wires.

    • Once the wire loosens remove the wire from the soldering point

    • Use a soldering vacuum to remove the excess solder

  5. Xelio P1001A-BK Speakers Replacement: adım 5, 1 resimden 1.
    • If necessary, strip 2mm of insulation from the wire.

  6. Xelio P1001A-BK Speakers Replacement: adım 6, 1 resimden 1.
    • Resolder wire to soldering point

    • Place wire in soldering point

    • Apply soldering iron and solder wire to the point

Sonuç

To reassemble your device, follow these instructions in reverse order.

Josh Saenz

Üyelik tarihi: 03/11/15

316 İtibar

3 adet Kılavuz yazıldı

Ekip

Colorado Springs, Team 4-2, Panko Spring 2015 Colorado Springs, Team 4-2, Panko Spring 2015 üyesi

UCCS-PANKO-S15S4G2

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 133