Eşyalarını Tamir Et Topluluk Mağaza

Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement

Giriş

This guide will go over the steps necessary to replace the omnidirectional wheel assembly at the front of the Roborock S5. Replacing this wheel assembly is sometimes necessary when there is an excess buildup of dirt, hair, and other fibrous debris that interferes with the wheel's ability to spin freely. In other cases, the wheel assembly can become damaged and need to be replaced entirely.

Before you begin the repair, make sure to turn off the device.

Neye ihtiyacın var

  1. Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement, Omnidirectional Wheel Assembly: adım 1, 3 resimden 1. Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement, Omnidirectional Wheel Assembly: adım 1, 3 resimden 2. Xiaomi ROBOROCK S5 Omnidirectional Wheel Assembly Replacement, Omnidirectional Wheel Assembly: adım 1, 3 resimden 3.

    • Power down your Roborock S5 vacuum.

    • Place it upside down with the omnidirectional wheel facing you.

    • Grab the wheel with your thumb and index finger and pull up.

    • The wheel assembly should pop out fairly easily and without too much force.

    • Remove any debris before replacing the wheel.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Jacob Searcy

Üyelik tarihi: 09/13/23

606 İtibar

4 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Western Carolina University, Team 1-1, Virtue Fall 2023 Western Carolina University, Team 1-1, Virtue Fall 2023 üyesi

WCU-VIRTUE-F23S1G1

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 23

Son 30 gün: 87

Her zaman: 442