Ana içeriğe geç

Giriş

Use this guide to remove the ambient light sensor in your Xiaomi Redmi 2 for repair or replacement.

Parçalar

Hiçbir parça belirtilmedi.

  1. Xiaomi Redmi 2 Ambient Light Sensor Replacement, Motherboard: adım 1, 2 resimden 1. Xiaomi Redmi 2 Ambient Light Sensor Replacement, Motherboard: adım 1, 2 resimden 2.
    • Use the flat end of the spudger to remove the back panel from the mid-frame and front body.

  2. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 2, 1 resimden 1.
    • Insert your finger into the curved opening of the mid-frame.

    • Lift the battery and remove.

  3. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 3, 1 resimden 1.
    • Remove the SIM and/or memory cards if present.

    • Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.

  4. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 4, 1 resimden 1.
    • Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.

  5. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 5, 1 resimden 1.
    • Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.

    • Keep this screw separate from the initial twelve.

  6. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 6, 2 resimden 1. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 6, 2 resimden 2.
    • Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.

  7. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 7, 2 resimden 1. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 7, 2 resimden 2.
    • Using one prong of the tweezers, pry the ribbon clip away from the motherboard.

  8. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 8, 2 resimden 1. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 8, 2 resimden 2.
    • Lift and hinge the motherboard with your fingers.

  9. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 9, 2 resimden 1. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 9, 2 resimden 2.
    • Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.

  10. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 10, 2 resimden 1. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 10, 2 resimden 2.
    • Using the tweezers, pull the antenna connector from the motherboard.

  11. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 11, 1 resimden 1.
    • Lift the motherboard out of the front cover and set aside.

  12. Xiaomi Redmi 2 Ambient Light Sensor Replacement, Ambient Light Sensor: adım 12, 1 resimden 1.
    • Using one prong of the tweezers, lift and loosen the edge of the ambient light sensor from the motherboard.

  13. Xiaomi Redmi 2 Ambient Light Sensor Replacement: adım 13, 1 resimden 1.
    • Using your fingers, gently pull out the ambient light sensor.

Sonuç

To reassemble your device, follow these instructions in reverse order.

17 farklı kişi bu kılavuzu tamamladı.

Alicia Brenner

Üyelik tarihi: 01-10-2015

3.509 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-3, Leahy Fall 2015 USF Tampa, Team 1-3, Leahy Fall 2015 üyesi

USFT-LEAHY-F15S1G3

2 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 12

Her zaman: 5,050