Xiaomi Redmi 2 Screen Assembly Replacement

Giriş

Use this guide to remove the screen assembly of your Xiaomi Redmi 2 for repair or replacement of any parts attached.

Neye ihtiyacın var

Adım 1 Motherboard

Xiaomi Redmi 2 Screen Assembly Replacement, Motherboard: adım 1, 2 resimden 1.

Xiaomi Redmi 2 Screen Assembly Replacement, Motherboard: adım 1, 2 resimden 2.

Use the flat end of the spudger to remove the back panel from the mid-frame and front body.

Düzenle

Adım 2

Insert your finger into the curved opening of the mid-frame.
Lift the battery and remove.

Düzenle

Adım 3

Remove the SIM and/or memory cards if present.
Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.

Düzenle

Adım 4

Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.

Düzenle

Adım 5

Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.
Keep this screw separate from the initial twelve.

Düzenle

Adım 6

Bu adımda kullanılan alet:

Tweezers

$4.99

Satın Al

Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.

Düzenle

Adım 7

Using one prong of the tweezers, pry the ribbon clip away from the motherboard.

Düzenle

Adım 8

Lift and hinge the motherboard with your fingers.

Düzenle

Adım 9

Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.

Düzenle

Adım 10

Using the tweezers, pull the antenna connector from the motherboard.

Düzenle

Adım 11

Lift the motherboard out of the front cover and set aside.

Düzenle

Adım 12 Front Speaker

Xiaomi Redmi 2 Screen Assembly Replacement, Front Speaker: adım 12, 1 resimden 1.

Using the nylon or metal spudger, gently pry the front speaker from the screen assembly.

Düzenle

Adım 13

Using your fingers, gently lift the front speaker from the screen assembly.

Düzenle

Adım 14 PCB Circuit Board

Xiaomi Redmi 2 Screen Assembly Replacement, PCB Circuit Board: adım 14, 1 resimden 1.

Remove the 2.9 mm Phillips #000 screw that holds the PCB circuit board to the screen assembly.

Düzenle

Adım 15

Bu adımda kullanılan alet:

Tweezers

$4.99

Satın Al

Using the tweezers, lift the antenna connector from the PCB circuit board.

Düzenle

Adım 16

Do not remove the PCB circuit board at this time.
Using the nylon or metal spudger, gently pry back the top of the PCB circuit board from the screen assembly.

Düzenle

Adım 17

Using the nylon or metal spudger, pry back the silver clip covering the ribbon connector.

Düzenle

Adım 18

Carefully lift the PCB circuit board from the screen assembly and set aside.
The screen assembly is pictured to the left of the circuit board and is now ready for repair or replacement.

Düzenle