Eşyalarını Tamir Et Topluluk Mağaza

XtremeMac Luna Dissasembly

Giriş

This guide will show you how to open the XtremeMac Luna so that its inner components are easily accessible.

Neye ihtiyacın var

  1. XtremeMac Luna Dissasembly, Bottom Panel: adım 1, 3 resimden 1. XtremeMac Luna Dissasembly, Bottom Panel: adım 1, 3 resimden 2. XtremeMac Luna Dissasembly, Bottom Panel: adım 1, 3 resimden 3.

    • Flip the device over so that the batteries are closest to you.

    • Remove the battery lid by pressing the battery cover's tab and pulling it away from the device.

    • Push the battery against the spring and lift it out of the casing.

    • Repeat with the other battery.

    Düzenle

  3. XtremeMac Luna Dissasembly: adım 2, 1 resimden 1.

    • Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.

    • The iFixit 26 bit screwdriver kit will not reach the screws. Make sure to use a screwdriver that is thin enough to not get stuck in the screw holes.

    Düzenle

  4. XtremeMac Luna Dissasembly: adım 3, 2 resimden 1. XtremeMac Luna Dissasembly: adım 3, 2 resimden 2.

    • Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you.

    • Gently tilt the lid back 45 degrees so that the inside is exposed.

    • Be mindful of the wires inside of the Luna. It is easy to break a connection if a wire gets caught.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Daniel Johnson

Üyelik tarihi: 04/14/13

1 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

Cal Poly, Team 3-47, Amido Spring 2013 Cal Poly, Team 3-47, Amido Spring 2013 üyesi

CPSU-AMIDO-S13S3G47

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 410