Eşyalarını Tamir Et Topluluk Mağaza

Yamaha YPG-225 Keys Replacement

Giriş

Learn to remove and replace a broken key for your keyboard with this guide. The process is fairly simple and mostly requires the removal of screws.

Neye ihtiyacın var

  1. Yamaha YPG-225 Keys Replacement, Batteries: adım 1, 1 resimden 1.

    • Turn the keyboard over so that the keys are facing the ground.

    Düzenle

  2. Yamaha YPG-225 Keys Replacement: adım 2, 1 resimden 1.

    • Pop the tabs on the battery casing and remove it from the back plate.

    Düzenle

  3. Yamaha YPG-225 Keys Replacement: adım 3, 1 resimden 1.

    • Locate the six batteries and remove them from the battery cavity.

    Düzenle

  4. Yamaha YPG-225 Keys Replacement, Faceplate: adım 4, 1 resimden 1.

    • Remove the six 10mm screws at the top of the backplate.

    Düzenle

  6. Yamaha YPG-225 Keys Replacement: adım 5, 1 resimden 1.

    • Remove the seven 12mm screws in the middle of the back plate.

    Düzenle

  7. Yamaha YPG-225 Keys Replacement: adım 6, 1 resimden 1.

    • Remove the eight 10mm screws from the side and the bottom of the back plate.

    Düzenle

  8. Yamaha YPG-225 Keys Replacement: adım 7, 1 resimden 1.

    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard.

    Düzenle

  9. Yamaha YPG-225 Keys Replacement: adım 8, 2 resimden 1. Yamaha YPG-225 Keys Replacement: adım 8, 2 resimden 2.

    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

    Düzenle

  10. Yamaha YPG-225 Keys Replacement, Keys: adım 9, 1 resimden 1.

    • Remove the 32mm screws that hold keys down.

    • Depending on which block of keys you wish to remove, there may be four screws instead of three.

    Düzenle

  11. Yamaha YPG-225 Keys Replacement: adım 10, 1 resimden 1.

    • Remove the block of keys that holds the key you wish to install.

    • To do this, apply a small force away from the top of the keys and slightly toward the floor.

    • If done correctly, the block of keys will come to a slight downward angle.

    Düzenle

  12. Yamaha YPG-225 Keys Replacement: adım 11, 2 resimden 1. Yamaha YPG-225 Keys Replacement: adım 11, 2 resimden 2.

    • Press the tab on the back side of the block of keys out and detach the black keys.

    Düzenle

  13. Yamaha YPG-225 Keys Replacement: adım 12, 1 resimden 1.

    • Remove the individual white key(s) or the black key set(s) that require replacement.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

7 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Kevin Green

Üyelik tarihi: 09/18/12

308 İtibar

2 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

Cal Poly, Team 2-62, Propen Fall 2012 Cal Poly, Team 2-62, Propen Fall 2012 üyesi

CPSU-PROPEN-F12S2G62

2 Üyeler

6 adet Kılavuz yazıldı

3 Yorum

Excellent, Although I've got a different type of yamaha keyboard, still good inside info.

Diederick Fokker - Yanıt

Great article. Thank you so much.

Andreas Devig - Yanıt

The instructions were very good and easy to understand. Question on the same subject. How about keys that have popped up on the key bed.

Donald Bryant - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 13

Her zaman: 21,160