Eşyalarını Tamir Et Topluluk Mağaza

Yujin Robot iCLEBO Arte Power Transformer Replacement

Giriş

This guide will show you how to replace the power transformer for your Yujin Robot iCLEBO Arte.

  1. Yujin Robot iCLEBO Arte Power Transformer Replacement, Power Transformer: adım 1, 1 resimden 1.

    • Unplug transformer before performing operations on it!

    • Press on the two black plastic tabs to remove the rear cover for the charging base.

    Düzenle

  2. Yujin Robot iCLEBO Arte Power Transformer Replacement: adım 2, 1 resimden 1.

    • Remove the long cable from inside the base and gently pull the connector from the base.

    Düzenle

  4. Yujin Robot iCLEBO Arte Power Transformer Replacement: adım 3, 1 resimden 1.

    • Pull out and remove the old cable from inside the charging base.

    • Detach the thicker part of the cord from the black transformer box.

    Düzenle

  5. Yujin Robot iCLEBO Arte Power Transformer Replacement: adım 4, 1 resimden 1.

    • Replace the new thick cable with the old cable just removed. Make sure the cable can fit into the wall before discarding the other cable. If you are residing in the US, this is the connector you need to use.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Trent Bingel

Üyelik tarihi: 02/28/17

428 İtibar

4 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

USF Tampa, Team S2-G3, Nance Spring 2017 USF Tampa, Team S2-G3, Nance Spring 2017 üyesi

USFT-NANCE-S17S2G3

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 11

Her zaman: 576