Eşyalarını Tamir Et Topluluk Mağaza

Yuneec Typhoon H Gimbal Bushing Reattachment

Giriş

This guide will demonstrate how to put the camera apparatus back together on a Yuneec Typhoon H, if it has come apart.

Neye ihtiyacın var

  1. Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: adım 1, 2 resimden 1. Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: adım 1, 2 resimden 2.

    • In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone.

    • Pull up on the tab connected to the camera configuration and slide the entire apparatus off.

    Düzenle

  3. Yuneec Typhoon H Gimbal Bushing Reattachment: adım 2, 3 resimden 1. Yuneec Typhoon H Gimbal Bushing Reattachment: adım 2, 3 resimden 2. Yuneec Typhoon H Gimbal Bushing Reattachment: adım 2, 3 resimden 3.

    • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

    • The circle that is separated from the main body of the bushing should then be inserted into the hole.

    • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

    Düzenle
Sonuç

To reassemble your device, simply slide the camera mount back onto the bottom of the drone.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

6 tane daha katılımcı ile

Jake Breul

Üyelik tarihi: 04/16/18

127 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 üyesi

CPSU-MANESS-S18S22G3

4 Üyeler

5 adet Kılavuz yazıldı

3 Yorum

Camera not getting power after crash.

Don - Yanıt

Crashed drone and camera not getting power anymore. Nothing appears to be broken.

Don - Yanıt

Did steps. Bushings ok. Camera still won't communicate.

vickiesamus - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 13

Her zaman: 1,614