Eşyalarını Tamir Et Topluluk Mağaza

ZTE Blade Spark Finger Sensor Assembly Replacement

Giriş

This guide will go through how to disassemble the phone and replace the finger sensor assembly safely. This item has electrical components and should be performed in a dry environment.

Neye ihtiyacın var

  1. ZTE Blade Spark Finger Sensor Assembly Replacement, Finger Sensor Assembly: adım 1, 1 resimden 1.

    • Carefully open the back cover.

    Düzenle

  2. ZTE Blade Spark Finger Sensor Assembly Replacement: adım 2, 2 resimden 1. ZTE Blade Spark Finger Sensor Assembly Replacement: adım 2, 2 resimden 2.

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    Düzenle

  4. ZTE Blade Spark Finger Sensor Assembly Replacement: adım 3, 1 resimden 1.

    • Slowly remove the back portion of the phone without pulling the attached cable.

    Düzenle

  5. ZTE Blade Spark Finger Sensor Assembly Replacement: adım 4, 2 resimden 1. ZTE Blade Spark Finger Sensor Assembly Replacement: adım 4, 2 resimden 2.

    • Release the attached cable and slowly remove the finger sensor from the phone entirely.

    Düzenle

  6. ZTE Blade Spark Finger Sensor Assembly Replacement: adım 5, 1 resimden 1.

    • Attach the cable of the new sensor to the motherboard of the phone.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Nathaniel Loewito Elijanto

Üyelik tarihi: 03/27/23

121 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

IUPUI, Team 1-3, Harley Spring 2023 IUPUI, Team 1-3, Harley Spring 2023 üyesi

IUPUI-HARLEY-S23S1G3

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 8

Her zaman: 75