Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Use this guide if you need to remove or replace your battery for ZTE Whirl 2 Model Z776G. Before you start refer to the Troubleshooting Page to see if there is another solution to your problem.

  1. Power off your phone before removing the battery. Pry the cover off the back of the phone using your fingers. Pry the cover off the back of the phone using your fingers.
    • Power off your phone before removing the battery.

    • Pry the cover off the back of the phone using your fingers.

  2. Pry the battery from the phone using your fingers. Pry the battery from the phone using your fingers. Pry the battery from the phone using your fingers.
    • Pry the battery from the phone using your fingers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alana Rucks

Üyelik tarihi: 04-02-2020

461 İtibar

4 adet Kılavuz yazıldı

Takım

UW Stout, Team S1-G1, Schneider-Bateman Spring 2020 UW Stout, Team S1-G1, Schneider-Bateman Spring 2020 üyesi

UWSTOUT-SCHNEIDER-BATEMAN-S20S1G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 27