Ana içeriğe geç

Giriş

If the camera seems cracked and/or not functioning, this is a quick guide on how to remove the existing camera.

Parçalar

Hiçbir parça belirtilmedi.

  1. Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail. Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail. Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.
    • Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.

  2. Remove all 16 screws with a J000 screwdriver. Remove all 16 screws with a J000 screwdriver.
    • Remove all 16 screws with a J000 screwdriver.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove the battery with an opening tool or fingernail. Remove the battery with an opening tool or fingernail. Remove the battery with an opening tool or fingernail.
    • Remove the battery with an opening tool or fingernail.

  5. Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device. Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device. Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.
    • Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.

  6. Once body is removed, back-facing camera is placed at the top left corner of device. Using an opening tool, pull up the tab of the camera wire ribbon. Using an opening tool, pull up the tab of the camera wire ribbon.
    • Once body is removed, back-facing camera is placed at the top left corner of device.

    • Using an opening tool, pull up the tab of the camera wire ribbon.

  7. Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently. Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently. Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.
    • Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Julian Mendoza

Üyelik tarihi: 21-09-2018

701 İtibar

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 92