Eşyalarını Tamir Et Topluluk Mağaza

Zebra ZP 450 Power Cord Replacement

Giriş

If your device fails to power on, it may be time to replace the power cord. Follow these instructions to replace the power cord in the Zebra ZP 450.

Neye ihtiyacın var

  1. Zebra ZP 450 Power Cord Replacement, Power Cord: adım 1, 1 resimden 1.

    • Using the TR10 Torx screwdriver, remove the four 8mm screws from the bottom of the device.

    • Remove the three 12mm screws from the bottom of the printer using a Phillips #1 screwdriver.

    Düzenle

  3. Zebra ZP 450 Power Cord Replacement: adım 2, 1 resimden 1.

    • Using the iFixit opening pick, remove the plastic cover.

    Düzenle

  4. Zebra ZP 450 Power Cord Replacement: adım 3, 1 resimden 1.

    • Using the Phillips #1 screwdriver, remove the single 14 mm screw from the clamp that is holding the power cord.

    • Remove the power cord from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 170