Eşyalarını Tamir Et Topluluk Mağaza

Zebra ZP 505 Peel and Present System Replacement

Giriş

Use the guide to safely replace the peel and present system with the help of a phillips head screwdriver set.

Neye ihtiyacın var

  1. Zebra ZP 505 Peel and Present System Replacement, Peel and Present System: adım 1, 2 resimden 1. Zebra ZP 505 Peel and Present System Replacement, Peel and Present System: adım 1, 2 resimden 2.

    • Orient the printer so that the bottom is facing up.

    • Remove the three P1 9mm screws located on the bottom of the printer and remove the lower unit.

    Düzenle

  2. Zebra ZP 505 Peel and Present System Replacement: adım 2, 2 resimden 1. Zebra ZP 505 Peel and Present System Replacement: adım 2, 2 resimden 2.

    • Remove the P0 9mm screw.

    • Proceed to remove the cover.

    Düzenle

  4. Zebra ZP 505 Peel and Present System Replacement: adım 3, 1 resimden 1.

    • Disconnect the harness.

    • Thread the harness through the hole on the right hand side.

    Düzenle

  5. Zebra ZP 505 Peel and Present System Replacement: adım 4, 1 resimden 1.

    • Remove the peel and present system by utilizing a metal spudger.

    Düzenle

  6. Zebra ZP 505 Peel and Present System Replacement: adım 5, 1 resimden 1.

    • Remove the peel and present system.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Brian Jagger

Üyelik tarihi: 09/27/17

316 İtibar

3 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Cal Poly, Team S8-G2, Banghart Fall 2017 Cal Poly, Team S8-G2, Banghart Fall 2017 üyesi

CPSU-BANGHART-F17S8G2

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 11

Her zaman: 757