Zoll Impact Uni-Vent 731 Battery Compartment Replacement

Giriş

The following guide will provide instructions on how to replace the battery compartment of the ventilator. This is a useful guide if there are any damages to the battery compartment case and it needs to be replaced. For more information on replacing the battery compartment, please refer to page 25 of the service manual.

Neye ihtiyacın var

Adım 1 Battery Compartment Kit

Zoll Impact Uni-Vent 731 Battery Compartment Replacement, Battery Compartment Kit: adım 1, 1 resimden 1.

Remove the battery compartment cover by unscrewing the (4) Phillips 6-32 X 5/16 screws. This is indicated in red with the number 1.
Page 25.

Düzenle

Adım 2

Remove the battery by unscrewing the (4)Phillips 6-32 X 2 ¼ screws and detaching the plug from its locking latch. This is indicated in the second picture in blue with the number 2.
Page 25.

Düzenle

Adım 3

Unscrew the (4) 6-32 X 5/16 Phillips screws to remove the damaged battery compartment case.
Page 25.

Düzenle

Adım 4

Rotate battery compartment to mate with upper and lower case cutouts and press firmly into place. Secure with (4) Phillips 6-32 X 5/16 screws provided.
Page 25.

Düzenle

Adım 5

Re-assemble the battery by connecting its cable to the connector (pull on cable to insure it is locked in place) then tightening the (4) Phillips 6-32 X 2 ¼ screws. This is indicated in blue with the number 5.
Page 25.

Düzenle