Eşyalarını Tamir Et Topluluk Mağaza

Zoomer Jurassic World Indominus Rex Back Cover Replacement

Giriş

Remove the back cover of the Zoomer Jurassic World Indominus Rex to get access to the motherboard, battery and the mechanical systems of the toy.

Neye ihtiyacın var

  1. Zoomer Jurassic World Indominus Rex Back Cover Replacement, Back Cover: adım 1, 1 resimden 1.

    • Turn off and unplug Zoomer Jurassic World Indominus Rex from any power source before doing replacements.

    • Remove all eight (8) 9.3mm Phillips screws using Phillips #1 screwdriver.

    Düzenle

  3. Zoomer Jurassic World Indominus Rex Back Cover Replacement: adım 2, 2 resimden 1. Zoomer Jurassic World Indominus Rex Back Cover Replacement: adım 2, 2 resimden 2.

    • Pry apart the back cover of the Jurassic Indominus Rex and the rest of the body using a spudger.

    • Do not take out the back cover immediately as it it still attached to the motherboard by a wire.

    Düzenle

  4. Zoomer Jurassic World Indominus Rex Back Cover Replacement: adım 3, 2 resimden 1. Zoomer Jurassic World Indominus Rex Back Cover Replacement: adım 3, 2 resimden 2.

    • Disconnect the orange wire that connects the motherboard and the back cover.

    • Separate the back cover and the rest of the Zoomer Jurassic World Indominus Rex.

    • Gently press the tab on the side of the orange connector if you are having trouble disconnecting the wire.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Anh Le

Üyelik tarihi: 01/20/16

504 İtibar

3 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

USF Tampa, Team 10-3, Remmell Spring 2016 USF Tampa, Team 10-3, Remmell Spring 2016 üyesi

USFT-REMMELL-S16S10G3

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 380