Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Zune Flash 2nd Generation Back Cover Replacement

Giriş

This is a guide to replacing the Back Cover on the Zune Flash 2nd Generation.

Neye ihtiyacın var

  1. Zune Flash 2nd Generation Back Cover Replacement, Back Cover: adım 1, 2 resimden 1. Zune Flash 2nd Generation Back Cover Replacement, Back Cover: adım 1, 2 resimden 2.

    • Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure.

    • If the device turns on while it is being disassembled it could cause irreversible damage to the device.

    • PICS MAKE NO SENSE.

    Düzenle

  2. Zune Flash 2nd Generation Back Cover Replacement: adım 2, 2 resimden 1. Zune Flash 2nd Generation Back Cover Replacement: adım 2, 2 resimden 2.

    • Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images.

    • You should hear a 'click' as the clip detaches from the device.

    Düzenle

  4. Zune Flash 2nd Generation Back Cover Replacement: adım 3, 1 resimden 1.

    • Remove the two screws shown using a small Tri-Wing screwdriver.

    • You will need to use a very small Tri-Wing screwdriver to ensure that you do not strip the screws.

    Düzenle

  5. Zune Flash 2nd Generation Back Cover Replacement: adım 4, 3 resimden 1. Zune Flash 2nd Generation Back Cover Replacement: adım 4, 3 resimden 2. Zune Flash 2nd Generation Back Cover Replacement: adım 4, 3 resimden 3.

    • Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.

    Düzenle

  6. Zune Flash 2nd Generation Back Cover Replacement: adım 5, 3 resimden 1. Zune Flash 2nd Generation Back Cover Replacement: adım 5, 3 resimden 2. Zune Flash 2nd Generation Back Cover Replacement: adım 5, 3 resimden 3.

    • Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

7 tane daha katılımcı ile

ybahman

Üyelik tarihi: 11/01/09

139 İtibar

4 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Cal Poly, Team 9-20, Regan Fall 2009 Cal Poly, Team 9-20, Regan Fall 2009 üyesi

CPSU-REGAN-F09S9G20

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 12

Her zaman: 3,680