Giriş

This guide will teach you how to remove, clean, and replace the front wheel on bObi.

Turn the front wheel so it faces bObi's front touch sensors.
  • Turn the front wheel so it faces bObi's front touch sensors.

  • Grip the wheel and pull straight up.

  • You may use a screwdriver for leverage when removing the wheel.

Yorum Ekle

This step is only necessary when cleaning the wheel. Skip to step 4 for instructions on installing a new wheel.
  • This step is only necessary when cleaning the wheel. Skip to step 4 for instructions on installing a new wheel.

  • To disassemble and deep clean the wheel, remove two small screws found on the bottom of the wheel. Then you can open it.

  • Grip the actual wheel and pull up to detach and clean beneath it. Use the screwdriver as leverage if you have difficulty separating the parts.

Yorum Ekle

  • This step is only necessary when cleaning bObi's front wheel. Skip to step 4 for instructions on installing the wheel.

  • After cleaning, replace the small spring piece inside the wheel.

  • Hold the wheel cover back together and install the two screws.

  • Place the small wheel back in its space and apply pressure until it reattaches.

Yorum Ekle

  • Place the wheel back in bObi. Make sure it faces in the same way as it did when removing (wheel closer to bObi's front).

  • Push down and the wheel will attach to bObi.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Chelsea

Üyelik tarihi: 24-09-2014

2.278 İtibar

31 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 213