Giriş

For help closing bObi when the repair is complete, see Closing bObi's Cover Post-Repair

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove bObi’s front wheel to access one of the screws holding bObi together.
    • Remove bObi’s front wheel to access one of the screws holding bObi together.

    • Make sure the wheel is turned closer to bObi's front touch sensors. Use your screwdriver for leverage, and the wheel will pop up and out.

    • Uninstall the larger screw that sits deeper in the wheel compartment.

    Yorum Ekle

  2. Remove bObi's dustbin.
    • Remove bObi's dustbin.

    • Uninstall the 2 screws close to the bin and 2 smaller screws above her main brushes.

    Yorum Ekle

    • Lift the brush holder. To detach completely, unplug it from bObi.

    • Remove the two screws on the dustbin contact point holder inside bObi.

    • There are 4 screws beneath the main brushes. Uninstall these, and open bObi up to expose her main circuit board.

    Yorum Ekle

    • Detach the two circuit plugs connecting bObi's cover to the main board and the cover will be completely removed.

    Yorum Ekle

    • Slide the power switch up and out of its holder.

    • Unplug its wires from the main board.

    Yorum Ekle

    • Slide the new power switch into the holders on bObi.

    • Plug it in to the main board and begin closing bObi up. For steps on how to close bObi, see Closing bObi's Cover Post-Repair

    Yorum Ekle

Sonuç

To reassemble your device, follow the guide on closing bObi Closing bObi's Cover Post-Repair

Chelsea

Üyelik tarihi: 24-09-2014

2.278 İtibar

31 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 151