Ana içeriğe geç

iPhone 8 Logic Board Replacement Girişe yapılan değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş
Introduction
Follow this guide to remove and replace the logic board for the iPhone 8.
Opening the iPhone 8 will damage the waterproof seals on the display. If you do not replace the adhesive seals, your phone will function normally, but will no longer be water-resistant.
'''Note:''' Each iPhone's logic board and Touch ID fingerprint sensor are paired at the factory, so replacing the logic board will disable Touch ID ''unless'' you also install a replacement home button that has been properly paired to your new logic board.
Time Required Max
1 saat
2 saat
Conclusion
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%208|Answers community] for troubleshooting help.