Ana içeriğe geç

iPhone 8 LCD and Digitizer Replacement Girişe yapılan değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş
Introduction
Follow this guide to replace a bare bones screen on an iPhone 8. This guide includes transferring the Touch ID sensor, earpiece speaker, front camera assembly, and LCD shield plate from the original assembly.
If your replacement display already includes those parts, follow [https://www.ifixit.com/Guide/iPhone+8+Display+Assembly+Replacement/guide|98255|this shorter guide instead].
In either case, '''it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.''' The solid state home button is paired to its original logic board by Apple, so replacing it will render it unusable.
Opening the iPhone 8 will damage the waterproof seals on the display. If you do not replace the adhesive seals, your phone will function normally, but will no longer be water-resistant.
Time Required Min
45 dakika
Time Required Max
2 saat
Imageid
Önce
Sonra

Parçalar

  • iPhone 8 LCD and Digitizer x1 added.