Ana içeriğe geç

Giriş Geçmişi: TiVo Bolt Hard Drive Replacement

Düzenleyen: Jacob

Düzenleme onaylandı tarafından Jacob

Önce
Sonra
Değiştirilmemiş
Cihaz
TiVo Bolt ( Series 6)
Type
replacement
Thing
Hard Drive
Title
TiVo Bolt Hard Drive Replacement
Introduction
There are currently to methods being used to upgrade/replace TiVo HDDs. One is replacing the internal 2.5" drive, the other is using a 3.5" drive by drilling a hole in the casing and using a sata extension cable and providing an external power source as well as a separate housing. TiVos are particular about what type of HDD is used. The parts section included the most popular choices for internal HDD replacement options. This Guide will cover replacing the internal 2.5" HDD with another 2.5" HDD. You can use a drive greater than 3tb however the TiVo box will not auto format it. This Guide will not cover how to format a HDD for use in a TiVO if it is over 3tb.
Time Required Min
10 dakika
Time Required Max
10 dakika
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Hayır

Aletler

  • TR9 Torx Security Screwdriver x1 A T9 worked for me however it seems some models use T10. added.
  • iFixit Opening Picks (Set of 6) x1 Not necessary but makes it easy to undo the plastic clips. added.
  • Spludger x1 Any small flat tool would work, used to cut through adhesive keeping plastic cable routing clips to HDD. added.

Parçalar

  • Toshiba 3TB (MQ03ABB300) x1 added.
  • 2TB WD Blue (WD20NPVZ) x1 added.
  • 3TB WD Blue (WD30NPRZ --00YRMT0) x1 added.

İşaretler

  • In Progress added.
  • Community-Contributed Guide added.

Adımlar

Adım #: 1
Önce
Sonra
Adım #: 2
Önce
Sonra
Adım #: 3
Önce
Sonra
Adım #: 4
Önce
Sonra
Adım #: 5
Önce
Sonra
Adım #: 6
Önce
Sonra
Adım #: 7
Önce
Sonra
Adım #: 8
Önce
Sonra