Eşyalarını Tamir Et Topluluk Mağaza

Giriş Geçmişi: DJI Phantom 4 Advanced Flight Controller Replacement

Düzenleyen: Ben Li —

Düzenleme onaylandı tarafından Ben Li

Önce
Sonra
Değiştirilmemiş
Cihaz
DJI Phantom 4 Advanced
Type
replacement
Thing
Flight Controller
Title
DJI Phantom 4 Advanced Flight Controller Replacement
Introduction
The flight controller houses sensors and firmware that are critical to the drone’s functionality. If your drone experiences in-flight drifting or errors with the IMU after calibration, your flight controller board may need to be replaced. To replace the board, you need a JIS #000 screwdriver, a 2mm hex bit, a 1.5mm hex bit, and a metal prying tool. Take special care when removing and installing the U.FL connector.
Time Required Min
30 dakika
Time Required Max
1 saat
Difficulty
Difficult
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Ben Li
Public
Hayır

Aletler

  • iFixit 4 mm Screwdriver Bit hex 1.5 x1 added.
  • 2 mm Hex Screwdriver x1 added.
  • Metal Spudger x1 added.
  • JIS #000 Screwdriver x1 added.

İşaretler

  • In Progress added.
  • Student In Progress added.